Mitel 5604 Podręcznik Użytkownika Pobierz pdf (Strona 58)

Mitel 5604 Wireless Handset User Guide

PTT Voice Style Calls (Handset initiated)

Each member of a PTT group is able to initiate a PTT call via a PTT request. This PTT Call

request is typically programmed onto a soft key, hot key or multi-function button on the handset

for quick access.

After a PTT Call request is made, the system invites the other members of the PTT group into

the PTT call. The invitation typically barges onto the invited members' handsets following brief

alerting of the incoming PTT call; manual PTT Call acceptance can be configured optionally.

After the PPT group members have received/accepted their PTT invitations, the system

automatically dials them onto the configured conference bridge and they become active in the

PTT call.

Accept a PTT Invitation - Voice Style

The PTT invitation is indicated by a icon and is received as an incoming call. In the dialog

window, a message containing maximum 24 characters can also be shown.

1. Press .

The handset may accept the invitation automatically and start in inverted mute and

loud-speaking mode, depending on the configuration of the received PTT invitation.

2. Press and hold the Mute button to open the microphone for transmitting.

The microphone is muted again when the Mute button is released.

Reject a PTT Invitation - Voice Style

Press to reject the PTT invitation. The handset will return to the previously shown screen.

See also“Re-join a PTT Group” on page 51.

PTT Message Style (System/Application Initiated)

This mode is typically used in conjunction with an application that triggers the PTT call based

on a alarm or communication escalation.

Accept a PTT Invitation - Message Style

The PTT invitation is received as a message, can contain up to 1000 characters, and is viewed

the same way as an ordinary message.

Note: Depending on the configuration, it may take 10 seconds or more for all members

to be active on the PTT call from the time a user initiates a PTT request.

Note: Multiple PTT groups are supported; if a handset is a member in multiple groups,

the PTT Groups can be programmed onto the handset menu to enable selection of the

appropriate PTT group Call request.

Note: This method requires an additional Alarm Management Server (AMS) module.

Note: This feature applies to the 5604 Services license only.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Brak uwag

Mitel 5604 Podręcznik Użytkownika Strona 58