Mitel SME Server V5 with ServiceLink Podręcznik Użytkownika Pobierz pdf (Strona 48)

Chapter 11. Conﬁguration

11.1. Set date and time

Accessing this section allows you to set the system date and time either manually or using a network time server. Pull-down menus for month and

time zone ensure accurate entry. The server manager will reset the time automatically during daylight savings time. There are worldwide time zones

with multiple selections for countries with multiple time zones. (including standard time zones, states/provinces and even cities). This ensures that

regional variations in time zones and daylight savings time are accurately reﬂected.

Instead of setting the time manually, you can use a network time server. A time server is a device on the Internet that keeps accurate time and is able

to communicate the time to other computers over the Internet using the Network Time Protocol (NTP). Many organizations around the world provide

Internet time servers for free.

Warning

After you start using a network time server, you should NOT set the time or date manually. If you do so, the network time synchronization

will no longer function.

This screen in the server manager allows you to conﬁgure your server to connect regularly to a time server and synchronize the clock on the server

with the time provided by the time server. To do this, simply check the box for "Enable NTP Service", add the domain name or IP address of the time

server in the space provided and click "Save NTP Settings". Using a time server is optional but doing so can greatly increase the accuracy of your

system.

For more information about using a network time server, visit http://www.ntp.org/. You can also ﬁnd a list of publicly available time servers at

http://www.eecis.udel.edu/~mills/ntp/servers.htm (http://www.eecis.udel.edu/~mills/ntp/servers.htm). You should always use a secondary time

server (also called a stratum 2 server) to lighten the load on the primary time servers.

Tip: In order to make sure the network time server is set to your timezone, you should go through this screen once and manually set the time to be

correct and with the correct timezone. After doing that, go back to this panel and set the server to use a network time server.

11.2. Workgroup

If you are using a computer on a local network and you wish to access the server via Windows ﬁle sharing, it is important that you are logged onto

the same workgroup as your SME Server V5 with ServiceLink. This screen allows you to enter the name of the Windows workgroup the server

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 90 91

Komentarze do niniejszej Instrukcji

Brak uwag

Mitel SME Server V5 with ServiceLink Podręcznik Użytkownika Strona 48

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery Mitel SME Server V5 with ServiceLink